01626 333 414
Please find an extensive list of available Hot Tub / Spa chemicals below.
This is perfect for giving your cartridge filters a new lease of life. Just remove the filters, spray on the solution and then clean with a soft toothbrush and warm water. For best results, rinse off with a hose afterwards.

This is a one use sachet for cleaning your catridge filters. Add it to a bucket of warm water and for best results let it soak overnight. Use a soft toothbrush to clean between the veins and then rinse off with a hose. DO NOT use a pressure washer as this may damage your filter.

Bromine is an ideal sanitiser for your Hot Tub / Spa. It is alot kinder to the skin than using Chlorine and needs to be kept at a residual level of between 4 - 6ppm.

AquaSparkle Hot Tub Flush is perfect for giving your Hot Tub a really deep clean. It is designed to clean the internal plumbing and remove pathogens which harbour in biofilm and scale formation within the pipework. Just add it into your Hot Tub, let it circulate and right before your very eyes you will see it work it's magic! We recommend using Hot Flush periodically to keep you Hot Tub / Spa in pristine condition.

Spa Fusion will give your Hot Tub / Spa a shock dose. This is a one use sachet which you add to the water and it will oxidise any organic material. Check the sanitisation levels are within the correct parameters before entering the water after shock dosing.

Using this product on a weekly basis will prevent foam build up within your Hot Tub / Spa. If you do notice an increase in foam appearing, place the recommended dosage into the water and the foam will instantly dissapear!

Bromine is an ideal sanitiser for your Hot Tub / Spa. It is alot kinder to the skin than using Chlorine and needs to be kept at a residual level of between 4 - 6ppm. Rather than using granules, it is possible to use Bromine tablets which are loaded into a floating dispenser and left to distribute the chemical throughout your Hot Tub. Don't forget to remove this before use!

This Cartridge Cleaner solution is designed to be added to a bucket of warm water. Place your cartridge filter in a bucket and let it soak for a few hours. During this time, use a soft toothbrush to clean between the veins and remove the build up of grime. This will give you great results and increase the longevity of your filters.

The hardness of the water in your Hot Tub / Spa is an important factor to take in to consideration. The hardness level should be kept just above 200ppm. This will enhance the life of your equipment and should prevent the water from corroding your pumps etc...

These stabilised mini chlorine tablets contain algae inhibitor and clarifier. Use them via a floating dispenser to distribute the chemical throughout your Hot Tub / Spa.

If you have sensitive skin, Non Chlorine Shock is the product for you. Add this to the water periodically to oxidise organic waste. When used in conjunction with the Aquablanc system you will not need to use chlorine/bromine based products!

pH balancing is vital in the day to day running of your Hot Tub / Spa. Use pH Minus to lower the pH to the recommended levels. Your pH should be within the range of 7.2 - 7.6 for optimum bather comfort.

Essential to balance the water in your Hot Tub / Spa, pH Plus is used to increase the pH to the desired level. Parameters should remain between 7.2 - 7.6 for optimum bather comfort.

If you live in a hard water area and have a build up of scale within the inernal pipework of your Hot Tub / Spa or on the fittings, this is a good remedial product. Use as directed and it will help to maintain your equipment.

Even when the water in your Hot Tub / Spa is properly maintained, sometimes it can still look a little cloudy. Using Spa Sparkle Clarifier will clear the water and once again give your Hot Tub / Spa that inviting appearance.

Stabilised Chlorine is a popular choice for Hot Tub / Spa Sanitisation. The level of chlorine needs to be maintained between 3 -5ppm for effective usage.

Use this product every time you drain your Hot Tub / Spa. It will remove the waterline staining and help to keep the shell in pristine condition. Your Hot Tub / Spa should be drained approximately every 6 weeks - depending on bather usage.

As part of your balancing regime you should be using Total Alkalinity Raiser. This helps to stabilise the pH. The Total Alkalinity should be maintained at around 100ppm - This is dependent on which type of sanitiser you are using.

This floating dispenser is the perfect way to dose chlorine / bromine tablets in to your Hot Tub / Spa water. It has an adjustable flow control so that you can be precise with the amount of chemical being added.

These 5 way Test Strips measure for free and total chlorine / bromine, total alkalinity, pH and total hardness. This is all you need to keep your Hot Tub / Spa water in prime condition.
| © 2010 All Rights Reserved | Signature Pools & Leisure | Disclaimer | Privacy | Web Design Devon | Special Offers |